Serving Montclair & the Inland Empire
Licensed & Insured Honest. Reliable. Local.
Sweetwater Plumbing 💬 Text us ☎ (909) 312-4516

Whole-home repiping,
PEX or copper.

If you are getting one leak after another, it is frustrating, and your pipes are telling you something. A whole-home repipe replaces every supply line in the house with modern PEX or copper, ending the cycle of leak after leak in old pipes. We will walk you through it every step of the way.

Comparing options? Read our PEX vs. Copper comparison for a side-by-side breakdown.
When repiping makes sense

Signs it's time to repipe.

You don't repipe because of one leak. You repipe when leaks become the pattern, not the exception. Common indicators:

  • Multiple leaks in 12 months: different fixtures, different rooms
  • Galvanized supply lines (common in Inland Empire homes pre-1970)
  • Polybutylene piping (gray plastic, 1970s-90s, known to fail)
  • Discolored water when you first turn on a faucet
  • Pinhole leaks in copper: usually a sign of corrosion throughout the system
  • Low pressure throughout the house from mineral buildup inside old pipes
  • You're already opening walls for a kitchen or bath remodel: repipe while access is easy

For Pomona, San Bernardino, Riverside, and Redlands homes built before 1970, galvanized pipe is common, so it is worth having it checked before the leaks start.

PEX vs. Copper Repipe, Key Differences
FeaturePEXCopper
Typical lifespan40-50 years50+ years
Cost vs. copperSignificantly lower material costHigher material cost
Ground movementFlexible: tolerates settling and small shiftsRigid: joints can stress with movement
Installation timeFaster (fewer fittings, flexible runs)Slower (every joint soldered)
Water tasteNeutral after initial flushSlight metallic taste possible in soft water
Corrosion resistanceDoes not corrode (brass fittings still can)Can corrode with acidic water
UV exposureMust be protected from sunlightUnaffected
Heat toleranceRated 180°F at 100 PSI (far above normal 120°F hot water)Handles hotter temperatures
Best forMost residential repipes, slab penetrationsExterior runs, high-temp applications, traditional aesthetic
The step most plumbers skip

Expansion tank
air charge.

A repipe is the right time to check the rest of the system, starting with the expansion tank on your water heater. When water heats up it expands, and in a home with a pressure regulator, that extra water has nowhere to go except the expansion tank.

The tank only works when its air charge matches your home’s water pressure. Tanks come pre-charged at the factory (commonly 40 PSI, depending on the brand), but many Inland Empire homes run 60 to 80 PSI. A tank that was never set right fills with water and lets pressure spikes hit your brand-new pipes, the water heater and every fixture.

We measure your home’s water pressure, and before we turn the water back on, we set the expansion tank’s air charge to match. Most plumbers skip it. We never skip it.

How a repipe goes

Your home stays livable, and the walls get patched.

  • Options in writing first: PEX or copper, the route the new lines take, and a flat-rate price, before any work begins
  • Phased work: one area at a time, to keep the disruption to your household low
  • Your home protected: floors and furniture covered, and work areas cleaned up as we go
  • Drywall patched: we patch the openings we make to run the new lines
  • Shut-offs labeled: new shut-off valves where they belong, labeled so you know which is which
Service Area

Serving 24 cities across the Inland Empire.

Chino · Chino Hills · Claremont · Colton · Corona · Diamond Bar · Eastvale · Fontana · Grand Terrace · Highland · La Verne · Loma Linda · Mira Loma · Montclair · Norco · Ontario · Pomona · Rancho Cucamonga · Redlands · Rialto · Riverside · San Bernardino · San Dimas · Upland

What customers say

Real reviews from real customers.

★★★★★4.8 / 5 average
· View all 588+ Google reviews →
LP
Linda Plum
★★★★★ Dec 2025
GOOGLE

Freddie and his crew were very professional respectful kind and understanding. I had my mobile home completely repiped and did little extra for me. Now I am set in My forever home knowing I have new and good pipes and water heater. I can not thank you enough.

KT
Kelly Torres
★★★★★ Dec 2025
GOOGLE

Freddy, Matt, John, Angel, and everyone else at Sweetwater is 100% 10/10 highly recommend. They have worked on all my plumbing at this point between installing a neat hot water heater, main water lines, and general plumbing issues. They cover it all with…

JA
John Amos
★★★★★ Apr 2026
GOOGLE

Freddy worked his tail off without stopping. Had to dig 4 feet down to find leaking water pipe. Cleaned the bathroom professionally. Never knew he was there after cleaning up.

Common Questions

Frequently asked questions.

How much does whole-home repiping cost in the Inland Empire?
We look at the job first, then give you your options in writing before any work begins, each with one flat-rate price. The price you approve is the price you pay. Our customers tell us our pricing is honest and fair. If you would rather pay over time, financing through Wisetack is available on jobs over $500, including repipes. Checking your financing options won’t affect your credit score.
Are you licensed for whole-home repiping in California?
Yes. Sweetwater Plumbing is a licensed C-36 Plumbing Contractor (California CSLB #889182), fully bonded with $2M general liability insurance.
Where do you offer whole-home repiping?
We provide whole-home repiping throughout the Inland Empire, including Montclair, Ontario, Upland, Rancho Cucamonga, Chino, Chino Hills, Pomona, Claremont, Fontana, Riverside, and 14 other cities. Call (909) 312-4516 to confirm coverage.

Related Services

Helpful guides & tools

(909) 312-4516 Text us